NICE RUN 2500I Sliding Gate Motor in UAE

NICE RUN 2500I Sliding Gate Opener:

• Ventilated motor with built-in inverter.
• Electromechanical gear motor with NICE Blue BUS technology.
• Compatible for operation with Solemyo and Opera systems.
• Simple to install: the Blue BUS system enables connections by means
• of just two wires between the control unit and up to 15 control safety and signalling devices.
• Safe: the acceleration settings (at the start of the manoeuvre)
• and the deceleration settings (at the end of the manoeuvre) are precise and reliable.
• The temperature sensor: Run is able to manage force,
• adapting it to the different climatic and environmental conditions,
• while adapting the thermal cut-out protection
• and intensity of self-ventilation, depending on the temperature reading.
• A master/slave selection also automatically synchronises 2 motors,
• enabling the automation of sliding gates with two opposing leaf's. (built-in inverter)
• Practical and functional: built-in inverter,
• housed inside Run, can be simply connected by means of the practical connector guide.
• Very quiet: gear motor on bearings.
• Perfect movement: the inverter enables the power supply and drive
• of the 3-phase motor with single-phase current at 230 Vac,
• acting on the frequency to adjust speed of the automation
• from a minimum of 8.2 m/min to maximum 15.4 m/min. In the automation deceleration phase,
• the inverter which dialogues with the control unit, increases the torque,
• thus improving performance and reducing the risk of the automation blocking on impact with obstacles.

NICE Remote Control:

• Frequency: 433.92 MHz
• Number of channels: 2
• Operating distance: 150/200 m with connected antenna in open spaces
• Dimensions: 58 x 86 x 22 mm.

NICE RUN 2500 Kg Included:

• 1 x NICE RUN 2500I Motor with electromechanical limit switch
• 1 x Rua2 Integrated control unit.
• 2 x ON2E Remotes.
• 1 x EPMB Pair of Blue bus Photocells.
• 1 x OXI Receiver.
• 1 x Blinker Light.
• 1 x Push button.